› Choice
of Terminal Exits › Advanced Thermal Engineering ›
Available with & without Thermocouple › Standard sizes
available › Higher Watt Density › Precision fit on
Hot Runner Nozzles › Highly Non-corrosive
Applications: Widely used for Hot Runner Nozzles
& Bushings, Die Cast Nozzles, Tube Extrusion & Pipe Forming
As the name
indicates, this is a Coil Heater Cast in Brass
having an outer casing of stainless steel
tube. Available with an added feature of built
in thermocouple, its applications are similar
to coil heaters, such as Hot Runner Nozzles,
Pressure Die Cast Nozzles, Tube Extrusion
etc. ... but have some advantages over the
Coil Heaters.
The Advantages
Highly non
corrosive.
Maximum heat transfer due to more contact
area.
Even temperature profile.
Precision fit on Hot Runner Nozzles.
Higher watt density.
SS casing acts as a heat insulator.
Robust cast body can withstand pressure during
leakages & avoids de-coiling.
As these heaters have very specific applications
they are made as per customers requirement.
Inner diameter of these heaters are ground
finished and can be provided with a tolerance
of 0.02mm.
Minimum
Wall Thickness
Units without Thermocouples: 4mm
Units with Built-in Thermocouples: 5mm
Units with Mineral Insulated Thermocouples:
6mm
Coldzone:
Minimum 35mm + Adapter 35mm = Total 70mm
Inner
Diameter & Length Dimensions:
10mm to 15mm Maximum Length -
60mm
16mm to 19mm Maximum Length -
100mm
20mm to 25mm Maximum Length -
160mm
